PIN No Pin Name Function 1 VINFC Input for focus driver 2 NC No connection 3 NC No connection 4 VINSL+ Input for the sled driver 5 NC No connection 6 FWD Tray driver forward input 7 REV Tray driver reverse input 8 Vcc1 Vcc for pre-drive block and power block of sled and tray 9 VOTR- Tray driver output (-) 10 VOTR+ Tray driver outpu.
1) Two channels are voltage-type BTL drivers for actuators of tracking and focus. Two channels are voltage-type BTL driver for sled and spindle motors. It is also built-in one channel bi-direction DC motor driver for tray. 2) Wide dynamic range [9.0V (typ.) when Vcc1= Vcc2= 12V, at RL= 20Ω load]. 3) Separating power of Vcc1 and Vcc2 is to improve power efficiency by a low supply voltage for tracking, focus, and spindle. 4) Level shift circuit built-in. 5) Thermal shut down circuit built-in. 6) Mute mode built-in. 7) Dual actuator drivers: A general purpose input OP provides differential input.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AM5668 |
Shanghai SIM-BCD Semiconductor |
5-Channel Motor Driver for DVD Player | |
2 | AM5669 |
BCD Semiconductor |
5-CHANNEL MOTOR DRIVER | |
3 | AM5680 |
BCD Semiconductor |
5-CHANNEL MOTOR DRIVER | |
4 | AM50-0002 |
Tyco Electronics |
Low Noise Amplifier 1.575 GHz | |
5 | AM50-0002 |
MA-COM |
Low Noise Amplifier | |
6 | AM50-0003 |
Tyco Electronics |
High Dynamic Range Low Noise Amplifier 800-1000 MHz | |
7 | AM50-0003 |
MA-COM |
High Dynamic Range Low Noise Amplifier | |
8 | AM50-0004 |
Tyco Electronics |
High Dynamic Range Low Noise Amplifier | |
9 | AM50-0004 |
MA-COM |
High Dynamic Range Low Noise Amplifier | |
10 | AM50-0006 |
Tyco Electronics |
Low Noise Amplifier 1400 - 2000 MHz | |
11 | AM50-0011 |
Tyco Electronics |
High Dynamic Range LNA 800 - 1000 MHz | |
12 | AM50-0012 |
M/A-Com |
High Dynamic Range Low Noise Amplifier |