The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, hig.
· S21 = 28.6 dB @ 1400 MHz = 27.4 dB @ 1600 MHz
· NF of 0.60 dB over Frequency
· Unconditionally Stable
· Single 5V Supply
· High OIP3 @ Low Current
Specifications (in Production)
Typ. @ T = 25°C, Vs = 5 V, Freq. = 1500 MHz, Zo.sys = 50 ohm
Parameter Frequency Range Gain Gain Flatness Noise Figure Output IP3 S11 / S22 Output P1dB Switching Time Supply Current Supply Voltage Impedance Max. RF Input Power Package Type & Size
(3)
Unit MHz dB dB dB dBm dB dBm µsec mA V Ω dBm mm
Specifications Min 1400 27 28 ± 0.6 0.60 39 21 40 -18 / -14 22 160 5 50 C.W 29 ~ 31 (before fail) Surface Mount Type,.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ALN1500AT |
Advanced Semiconductor |
Internally Matched LNA Module | |
2 | ALN1502AT |
Advanced Semiconductor |
Internally Matched LNA Module | |
3 | ALN1542T2 |
Advanced Semiconductor |
Internally Matched LNA Module | |
4 | ALN1585 |
Advanced Semiconductor |
Internally Matched LNA Module | |
5 | ALN1100 |
Advanced Semiconductor |
Internally Matched LNA Module | |
6 | ALN1100BT |
Advanced Semiconductor |
Internally Matched LNA Module | |
7 | ALN1100T2 |
Advanced Semiconductor |
Internally Matched LNA Module | |
8 | ALN1101 |
Advanced Semiconductor |
Internally Matched LNA Module | |
9 | ALN1220AT |
ASB |
Internally Matched LNA | |
10 | ALN1250 |
Advanced Semiconductor |
Internally Matched LNA Module | |
11 | ALN1280 |
Advanced Semiconductor |
Internally Matched LNA Module | |
12 | ALN1300 |
ASB |
Internally Matched LNA Module |