Avago Technologies’ ALM-81224 is a high linearity variable-gain amplifier module for use in the 1450-2750MHz band. Gain control is achieved using a single DC voltage input pin. High linearity is achieved through the use of Avago Technologies’ proprietary GaAs Enhancementmode pHEMT process1. It is housed in a miniature 6.0 x 6.0 x 1.0 mm 24-pin Molded Chip On.
x High Linearity at low bias current x High max gain: 23.8 dB typ x High linearity performance: +16.5 dBm at -65 dBc ACLR using dual-carrier W-CDMA input signal x Fully-matched 50 Ohm input and simple output match x Low Noise Figure x Built-in attenuator with monotonic response x Variable Gain range: 38 dB typ x GaAs E-pHEMT Technology [1] x Small package size: 6.0 x 6.0 x 1.0 mm Typical Performances 2140 MHz @ 5 V, 383 mA (typ) x 23.8 dB Gain at minimum attenuation x +16.5 dBm output power (-65 dBc ACLR) using dual- carrier W-CDMA input signal with PAPR = 7.5 dB. x NF: 2dB @ max gain and 16 d.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ALM-80110 |
AVAGO |
0.25W Analog Variable Gain Amplifier | |
2 | ALM-80210 |
AVAGO |
0.25W Analog Variable Gain Amplifier | |
3 | ALM-11036 |
AVAGO |
Amplifier | |
4 | ALM-1106 |
Agilent Technologies |
GPS Low Noise Amplifier | |
5 | ALM-1106 |
AVAGO |
Amplifier | |
6 | ALM-11136 |
Avago |
870 MHz - 915 MHz Low Noise High Linearity Amplifier | |
7 | ALM-11236 |
AVAGO |
Amplifier | |
8 | ALM-11336 |
AVAGO |
Amplifier | |
9 | ALM-12124 |
AVAGO |
High Power SPDT Switch | |
10 | ALM-1222 |
AVAGO |
High Linearity Balanced Amplifier Module | |
11 | ALM-12224 |
AVAGO |
High Power SPDT Switch | |
12 | ALM-1322 |
AVAGO |
1.8-2.2GHz Very Low Noise High Gain Balanced Amplifier Module |