Avago Technologies’s ALM-2506 is a LNA designed for GPS/ISM/Wimax applications in the (0.9-2.4)GHz frequency range. The LNA uses Avago Technologies’s proprietary GaAs Enhancement-mode pHEMT process to achieve high gain operation with very low noise figures and high linearity. Noise figure distribution is very tightly controlled. Gain and supply current are g.
Surface Mount 2.0 x 2.0 x 1.1 mm3 MCOB
Advanced GaAs E-pHEMT
Low Noise: 0.8 dB typ
High Gain: 14.3 dB typ
Low component count
High IIP3 and IP1dB
Wide Supply Voltage: 1V to 3.6V
Shutdown current: < 0.1uA
CMOS compatible shutdown pin (VSD) current @ 2.85V:
90uA
Adjustable bias current via one single external resistor/
voltage
Small Footprint: 2x2mm2
Low Profile: 1.1mm typ
Lead free and Halogen free
Ext matching for non-GPS freq band operation
Specifications (25 deg):
At 1.575GHz, 2.85V 8mA (Typ)
Gain = 14.3 dB (Typ)
NF = 0.8 dB (Typ)
IIP3 = 4.7.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ALM-2203 |
AVAGO |
SDARS LNA Module | |
2 | ALM-2412 |
AVAGO |
GPS LNA-Filter Front-End Module | |
3 | ALM-2712 |
AVAGO |
GPS Filter-LNA-Filter Front-End Module | |
4 | ALM-2812 |
AVAGO |
Dual-Band (2.4-2.5) GHz & (4.9-6) GHz WLAN Low-Noise Amplifier | |
5 | ALM-11036 |
AVAGO |
Amplifier | |
6 | ALM-1106 |
Agilent Technologies |
GPS Low Noise Amplifier | |
7 | ALM-1106 |
AVAGO |
Amplifier | |
8 | ALM-11136 |
Avago |
870 MHz - 915 MHz Low Noise High Linearity Amplifier | |
9 | ALM-11236 |
AVAGO |
Amplifier | |
10 | ALM-11336 |
AVAGO |
Amplifier | |
11 | ALM-12124 |
AVAGO |
High Power SPDT Switch | |
12 | ALM-1222 |
AVAGO |
High Linearity Balanced Amplifier Module |