Pin Assignments The AH8500 is a low power/micropower linear Hall effect sensor with an 8-bit output resolution. The output voltage is ratiometric to the supply voltage and proportional to the magnetic flux density perpendicular to the part marking surface. The output null voltage is at half the supply voltage. AH8500 has a typical sensitivity of 2.1mV/G an.
Linear Hall Effect Sensor with +/-430G Sense Range and Output Voltage with 8-bit resolution
Supply Voltage of 1.6V to 3.6V
Sensitivity: 2.1mV/G and 3.55mV/G at 1.8V and 3V at +25oC
Low Offset Voltage
Low Average Supply Current
8.9µA Typical in Sleep Mode (Default) at 1.8V
1.01mA Typical in Auto-Run Mode ( 6.25kHz) at 1.8V
12µA Typical in External Drive Mode with 20Hz Sample
Rate at 1.8V
1.16mA Typical in External Drive Mode with 7.14kHz
Sample Rate at 1.8V
Chopper Stabilized Design with Superior Temperature Stability,
Minimal Sensitivity Drift, Enhanced Immunity to Physical.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AH8501 |
Diodes |
HIGH ACCURACY LOW POWER / MICROPOWER LINEAR HALL EFFECT SENSOR | |
2 | AH8502 |
Diodes |
MICROPOWER LINEAR HALL EFFECT SENSOR | |
3 | AH8503 |
Diodes |
HIGH ACCURACY MICROPOWER LINEAR HALL EFFECT SENSOR | |
4 | AH80W |
HITANO |
ALUMINUM HOUSED RESISTORS | |
5 | AH8102 |
AiT Semiconductor |
ULTRA-SENSITIVE HALL EFFECT SWITCH | |
6 | AH8103 |
AiT Semiconductor |
ULTRA-SENSITIVE HALL SWITCH | |
7 | AH8113 |
AiT Semiconductor |
CMOS HALL SWITCH | |
8 | AH8115 |
AiT Semiconductor |
HIGH SENSITIVITY CMOS HALL IC | |
9 | AH8231 |
AiT Semiconductor |
OMNIPOLAR HALL EFFECT SWITCH IC | |
10 | AH8304EC |
Analogic |
RGB 4-Bit Video D/A Converters | |
11 | AH8304TC |
Analogic |
RGB 4-Bit Composite Video D/A Converters | |
12 | AH8304TM |
Analogic |
RGB 4-Bit Composite Video D/A Converters |