AH284 is a monolithic fan motor controller with Hall sensor’s capability. It contains two complementary open-drain drivers for motor’s coil driving, automatic lock shutdown and restart function relatively. To avoid coil burning, rotor-lock shutdown detection circuit shut down the output driver if the rotor is blocked and then the automatic recovery circuit w.
- On chip Hall sensor - Rotor-locked shutdown - Automatically restart - Built-in Zener protection for output driver - Operating voltage: 3.8V~20 V - Output current: IO(AVE) = 500mA for SIP-4/SOT89-5 - Output current: IO(AVE) = 400mA for SOT23-5 - Package: SIP-4L, SOT23-5L, SOT89-5L General Description AH284 is a monolithic fan motor controller with Hall sensor’s capability. It contains two complementary open-drain drivers for motor’s coil driving, automatic lock shutdown and restart function relatively. To avoid coil burning, rotor-lock shutdown detection circuit shut down the output driver.
Pin Assignments The AH284 is a single-chip solution for driving two-coil brushless direct current (BLDC) fans and moto.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AH285 |
Diodes Incorporated |
HALL-EFFECT SMART FAN MOTOR CONTROLLER | |
2 | AH285 |
Anachip |
Hall-Effect Smart Fan Motor Controller | |
3 | AH286 |
Diodes Incorporated |
HALL-EFFECT SMART FAN MOTOR CONTROLLER | |
4 | AH286 |
Anachip |
Hall-Effect Smart Fan Motor Controller | |
5 | AH287 |
Diodes Incorporated |
HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER | |
6 | AH287 |
Anachip |
High Voltage Hall-Effect Smart Fan Motor Controller | |
7 | AH288 |
Diodes Incorporated |
HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER | |
8 | AH289 |
Diodes Incorporated |
HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER | |
9 | AH289 |
Anachip |
High Voltage Hall-Effect Smart Fan Motor Controller | |
10 | AH2 |
WJ Communication |
High Dynamic Range Amplifier | |
11 | AH20 |
Aperio |
Hub Installation Instructions | |
12 | AH200 |
Marconi |
Rectifier |