The ADS8512 is a complete low-power, single 5-V supply, 12-bit sampling analog-to-digital (A/D) converter. It contains a complete 12-bit capacitor-based, successive approximation register (SAR) A/D converter with sample-and-hold (S/H), clock, reference, and serial data interface. The converter can be configured for a variety of input ranges including ±10 V, .
1
•234 40-kHz Minimum Sampling Rate
• Very Low Power: 25 mW
• ±3.33-V, ±5-V, ±10-V, 4-V, and 10-V Input
Ranges
• 73.9-dB SINAD with 10-kHz Input
• ±0.5 LSB Max INL
• ±0.5 LSB Max DNL, 12-Bit NMC
• ±5-mV BPZ, ±2 ppm/°C BPZ Drift
• 72-dB Min SINAD, 80-dB Min SFDR
• Uses Internal or External 2.5-V Reference
• No External Calibration Resistors Required
• Single 5-V Analog Supply:
– 32.5-mW Max Power Dissipation
– 50-µW Max Power-Down Mode
• SPI™-Compatible Serial Port up to 20MHz, with Master/Slave Feature
• Global CONV and 3-Stated Bus for Multi-Chip Simultaneous S/H Operation
• Pin-Compatible wi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ADS8513 |
Texas Instruments |
ANALOG-TO-DIGITAL CONVERTER | |
2 | ADS8515 |
Texas Instruments |
ANALOG-TO-DIGITAL CONVERTER | |
3 | ADS8517 |
Texas Instruments |
ANALOG-TO-DIGITAL CONVERTER | |
4 | ADS8519 |
Texas Instruments |
ANALOG-TO-DIGITAL CONVERTER | |
5 | ADS850 |
Burr-Brown |
ANALOG-TO-DIGITAL CONVERTER | |
6 | ADS8504 |
Burr-Brown |
SAMPLING CMOS ANALOG-TO-DIGITAL CONVERTER | |
7 | ADS8505 |
Burr-Brown |
ANALOG-TO-DIGITAL CONVERTER | |
8 | ADS8506 |
Burr-Brown Corporation |
12-BIT 40-KSPS LOW POWER SAMPLING ANALOG-TO-DIGITAL CONVERTER | |
9 | ADS8507 |
Burr-Brown |
ANALOG-TO-DIGITAL CONVERTER | |
10 | ADS8508 |
Burr-Brown |
ANALOG-TO-DIGITAL CONVERTER | |
11 | ADS8509 |
Texas Instruments |
ANALOG-TO-DIGITAL CONVERTER | |
12 | ADS8509 |
Burr-Brown Corporation |
16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER |