The ADP5075 is a high performance dc-to-dc inverting regulator used to generate negative supply rails. The input voltage range of 2.85 V to 15 V supports a wide variety of applications. The integrated main switch enables the generation of an adjustable negative output voltage down to 39 V below the input voltage. The ADP5075 operates at a pin selected 1.2 MH.
Wide input voltage range: 2.85 V to 15 V Adjustable negative output to VIN − 39 V Integrated 800 mA main switch 1.2 MHz/2.4 MHz switching frequency with optional external frequency synchronization from 1.0 MHz to 2.6 MHz Resistor programmable soft start timer Slew rate control for lower system noise Precision enable control UVLO, OCP, OVP, and TSD protection 1.61 mm × 2.18 mm, 12-ball WLCSP −40°C to +125°C junction temperature range Supported by the ADIsimPower tool set APPLICATIONS Bipolar amplifiers, analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and multiplexers C.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ADP5070 |
Analog Devices |
DC-to-DC Switching Regulator | |
2 | ADP5071 |
Analog Devices |
DC-to-DC Switching Regulator | |
3 | ADP5073 |
Analog Devices |
DC-to-DC Inverting Regulator | |
4 | ADP5074 |
Analog Devices |
DC-to-DC Inverting Regulator | |
5 | ADP5014 |
Analog Devices |
Integrated Power | |
6 | ADP5020 |
Analog Devices |
Power Management | |
7 | ADP5022 |
Analog Devices |
600mA Buck Regulator | |
8 | ADP5023 |
Analog Devices |
Regulators | |
9 | ADP5024 |
Analog Devices |
Regulators | |
10 | ADP5030 |
Analog Devices |
High Performance RF LDO | |
11 | ADP5033 |
Analog Devices |
800mA Buck Regulators | |
12 | ADP5034 |
Analog Devices |
1200 mA Buck Regulators |