The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typically 2.5 Ω, making the part an attractive solution for applications that require low .
USB 1.1 signal switching compliant −3 dB bandwidth, 150 MHz Tiny 10-lead LFCSP and MSOP packages, 10-ball WLCSP package Single-supply 1.8 V to 5.5 V operation Low on resistance 2.5 Ω typical 3.45 Ω maximum at 85°C Typical power consumption: <0.1 μW FUNCTIONAL BLOCK DIAGRAM ADG787 S1A D1 S1B IN1 IN2 S2A D2 S2B SWITCHES SHOWN FOR A LOGIC 0 INPUT 05250-001 APPLICATIONS USB 1.1 signal switching circuits Cellular phones PDAs MP3 players Battery-powered systems Headphone switching Audio and video signal routing Communications systems Figure 1. GENERAL DESCRIPTION The ADG787 is a low voltage, CMO.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ADG781 |
Analog Devices |
2.5 ohm Quad SPST Switches in Chip Scale Package | |
2 | ADG782 |
Analog Devices |
2.5 ohm Quad SPST Switches in Chip Scale Package | |
3 | ADG783 |
Analog Devices |
2.5 ohm Quad SPST Switches in Chip Scale Package | |
4 | ADG784 |
Analog Devices |
CMOS 3 V/5 V/ Wide Bandwidth Quad 2:1 Mux in Chip Scale Package | |
5 | ADG786 |
Analog Devices |
Triple SPDT Switches | |
6 | ADG788 |
Analog Devices |
Quad SPDT Switches | |
7 | ADG701 |
Analog Devices |
CMOS Low Voltage 2ohm SPST Switches | |
8 | ADG701L |
Analog Devices |
(ADG701L / ADG702L) CMOS Low Voltage 2 OHM SPST Switches | |
9 | ADG702 |
Analog Devices |
CMOS Low Voltage 2ohm SPST Switches | |
10 | ADG702L |
Analog Devices |
(ADG701L / ADG702L) CMOS Low Voltage 2 OHM SPST Switches | |
11 | ADG704 |
Analog Devices |
CMOS Low Voltage 4 ohm/ 4-Channel Multiplexer | |
12 | ADG706 |
Analog Devices |
CMOS/ 2.5ohm Low-Voltage/ 8-/16-Channel Multiplexers |