The ADA4898-1/ADA4898-2 are ultralow noise and distortion, unity gain stable, voltage feedback op amps that are ideal for use in 16-bit and 18-bit systems with power supplies from ±5 V to ±16 V. The ADA4898-1/ADA4898-2 feature a linear, low noise input stage and internal compensation that achieves high slew rates and low noise. With the wide supply voltage r.
Ultralow noise 0.9 nV/√Hz 2.4 pA/√Hz 1.2 nV/√Hz at 10 Hz Ultralow distortion: −93 dBc at 500 kHz Wide supply voltage range: ±5 V to ±16 V High speed −3 dB bandwidth: 65 MHz (G = +1) Slew rate: 55 V/µs Unity gain stable Low input offset voltage: 160 µV maximum Low input offset voltage drift: 1 μV/°C Low input bias current: −0.1 µA Low input bias current drift: 2 nA/°C Supply current: 8 mA Power-down feature for single 8-lead package APPLICATIONS Instrumentation Active filters DAC buffers SAR ADC drivers Optoelectronics GENERAL DESCRIPTION The ADA4898-1/ADA4898-2 are ultralow noise and distortio.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ADA4898-2 |
Analog Devices |
High Speed Op Amp | |
2 | ADA4891-1 |
Analog Devices |
Rail-to-Rail Amplifiers | |
3 | ADA4891-2 |
Analog Devices |
Rail-to-Rail Amplifiers | |
4 | ADA4891-3 |
Analog Devices |
Rail-to-Rail Amplifiers | |
5 | ADA4891-4 |
Analog Devices |
Rail-to-Rail Amplifiers | |
6 | ADA4895-1 |
Analog Devices |
Railto-Rail Output Amplifier | |
7 | ADA4895-2 |
Analog Devices |
Railto-Rail Output Amplifier | |
8 | ADA4896-2 |
Analog Devices |
Rail-to-Rail Output Amplifiers | |
9 | ADA4897-1 |
Analog Devices |
Rail-to-Rail Output Amplifiers | |
10 | ADA4897-2 |
Analog Devices |
Rail-to-Rail Output Amplifiers | |
11 | ADA4899-1 |
Analog Devices |
High Speed Op Amp | |
12 | ADA4800 |
Analog Devices |
High Speed CCD Buffer Amplifier |