The AD815 consists of two high speed amplifiers capable of supplying a minimum of 500 mA. They are typically configured as a differential driver enabling an output signal of 40 V p-p on ± 15 V supplies. This can be increased further with the use of a coupling trans.
Flexible Configuration
Differential Input and Output Driver or Two Single-Ended Drivers Industrial Temperature Range High Output Power Thermally Enhanced SOIC
400 mA Minimum Output Drive/Amp, RL = 10 ⍀ Low Distortion
–66 dB @ 1 MHz THD, RL = 200 ⍀, VOUT = 40 V p-p 0.05% and 0.45؇ Differential Gain and Phase, RL = 25 ⍀
(6 Back-Terminated Video Loads) High Speed
120 MHz Bandwidth (
–3 dB) 900 V/s Differential Slew Rate 70 ns Settling Time to 0.1% Thermal Shutdown
APPLICATIONS ADSL, HDSL, and VDSL Line Interface Driver Coil or Transformer Driver CRT Convergence and Astigmatism Adjustment Video Di.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AD810 |
Analog Devices |
Low Power Video Op Amp | |
2 | AD8104 |
Analog Devices |
32 x 16 Buffered Analog Crosspoint Switch | |
3 | AD8105 |
Analog Devices |
32 x 16 Buffered Analog Crosspoint Switch | |
4 | AD8106 |
Analog Devices |
(AD8106 / AD8107) 16 x 5 Buffered Video Crosspoint Switches | |
5 | AD8107 |
Analog Devices |
(AD8106 / AD8107) 16 x 5 Buffered Video Crosspoint Switches | |
6 | AD8108 |
Analog Devices |
8 x 8 Buffered Video Crosspoint Switches | |
7 | AD8109 |
Analog Devices |
8 x 8 Buffered Video Crosspoint Switches | |
8 | AD811 |
Analog Devices |
High Performance Video Op Amp | |
9 | AD8110 |
Analog Devices |
16 x 8 Buffered Video Crosspoint Switches | |
10 | AD8111 |
Analog Devices |
16 x 8 Buffered Video Crosspoint Switches | |
11 | AD8112 |
Analog Devices |
fully buffered crosspoint switch matrix that operates | |
12 | AD8113 |
Analog Devices |
Audio/Video Crosspoint Switch |