The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontroller to adjust volume and many other parameters. The AD193X family operates from 3.3V .
PLL generated (32-192kHz) or direct master clock Low EMI design 109 dB DAC/ 107dB ADC Dynamic Range and SNR -94dB THD+N Single 3.3V Supply Tolerance for 5V logic inputs Supports 24-bits and 8 kHz - 192 kHz sample rates Differential ADC input Single-ended or Differential DAC output versions Log volume control with "auto-ramp" function Hardware and software controllable clickless mute Software and hardware power-down Right justified, left justified, I2S and TDM Modes Master and slave modes up to 16 channel in/out 48-lead LQFP or 64-lead LQFP plastic package AD1935/AD1936/AD1937/AD1938/AD1939 Ap.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AD1933 |
Analog Devices |
8-Channel DAC | |
2 | AD1934 |
Analog Devices |
8-Channel DAC | |
3 | AD1935 |
Analog Devices |
(AD1935 - AD1939) 4 ADC/8 DAC | |
4 | AD1936 |
Analog Devices |
(AD1935 - AD1939) 4 ADC/8 DAC | |
5 | AD1938 |
Analog Devices |
4 ADC / 8 DAC | |
6 | AD1939 |
Analog Devices |
24-Bit CODEC | |
7 | AD1928 |
Analog Devices |
2 ADC/8 DAC | |
8 | AD1940 |
Analog Devices |
SigmaDSP Multichannel 28-Bit Audio Processor | |
9 | AD1941 |
Analog Devices |
SigmaDSP Multichannel 28-Bit Audio Processor | |
10 | AD194TW |
Toshiba |
Display Service Manual | |
11 | AD1953 |
Analog Devices |
SigmaDSP 3-Channel/ 26-Bit Signal Processing DAC | |
12 | AD1954 |
Analog Devices |
SigmaDSP 3-Channel/ 26-Bit Signal Processing DAC |