ACS706ELC-20A Bidirectional 1.5 mΩ Hall Effect Based Linear Current Sensor IC with Voltage Isolation and 20 A Dynamic Range Package LC 8 7 1 6 2 5 3 4 Pin 1: IP+ Pin 2: IP+ Pin 3: IP– Pin 4: IP– Pin 5: GND Pin 6: VOUT Pin 7: VOUT Pin 8: VCC Nominal Operating Temperature, TA Range E.............. –40 to 85ºC Overcurr.
• Small footprint, low-profile SOIC8 package
• 1.5 mΩ internal conductor resistance
• Excellent replacement for sense resistors
• 1600 VRMS minimum isolation voltage between pins 1-4 and 5-8
• 4.5 to 5.5 V, single supply operation
• 50 kHz bandwidth
• 100 mV/A output sensitivity and 20 A dynamic range
• Output voltage proportional to ac and dc currents
• Factory-trimmed for accuracy
• Extremely stable output offset voltage
• Near-zero magnetic hysteresis
• Ratiometric output from supply voltage
TÜV America Certificate Number: U8V 04 12 54214 005
Use the following complete part number when or.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ACS706ELC-05C |
Allegro MicroSystems |
Hall Effect Based Linear Current Sensor | |
2 | ACS70310 |
Allegro |
Programmable Linear Hall-Effect Sensor | |
3 | ACS70311 |
Allegro |
Programmable Linear Hall-Effect Sensor | |
4 | ACS70331 |
Allegro |
GMR-Based Current Sensor | |
5 | ACS704ELC-005 |
Allegro MicroSystems |
Fully Integrated / Hall Effect-Based Linear Current Sensor | |
6 | ACS704ELC-015 |
Allegro MicroSystems |
Fully Integrated / Hall Effect-Based Linear Current Sensor | |
7 | ACS709 |
Allegro MicroSystems |
Fast Fault Response Current Sensor | |
8 | ACS710 |
Allegro MicroSystems |
120kHz Bandwidth High Voltage Isolation Current Sensor | |
9 | ACS71020 |
Allegro |
AC Power Monitoring | |
10 | ACS711 |
Allegro MicroSystems |
Hall Effect Linear Current Sensor | |
11 | ACS712 |
Allegro MicroSystems |
Fully Integrated / Hall Effect-Based Linear Current Sensor | |
12 | ACS71240 |
Allegro |
Galvanically Isolated Current Sensor |