The ACS37030/2 is a fully integrated current sensor IC that senses current flowing through the primary conductor. Two signal paths are used: a Hall-effect element path to capture DC and low-frequency current information, and an inductive coil path to capture high-frequency current information. These two paths are summed to allow for sensing of a wide frequen.
• High operating bandwidth for fast control loops or where high-speed switching currents are monitored □ DC to 5 MHz bandwidth □ 40 ns typical response time
• High accuracy and low noise □ ±2% sensitivity error over temperature □ ±10 mV maximum offset voltage over temperature □ 50 mARMS input referred noise □ 3.3 V non-ratiometric supply operation □ Differential sensing immune to external magnetic fields
• VREF output voltage for differential routing in noisy application environments (ACS37030)
• FAULT output for fast open drain overcurrent detection (ACS37032)
• Highly isolated compact surfac.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ACS37032 |
Allegro |
High-Accuracy Current Sensor | |
2 | ACS37002 |
Allegro |
High Accuracy Current Sensor | |
3 | ACS37002LMC |
Allegro |
High Accuracy Current Sensor | |
4 | ACS373MS |
Intersil Corporation |
Radiation Hardened Octal Transparent Latch | |
5 | ACS374MS |
Intersil Corporation |
Radiation Hardened Octal D Flip-Flop | |
6 | ACS37610H |
Allegro |
Hall-Effect Current Sensor | |
7 | ACS37612 |
Allegro |
Hall-Effect Current Sensor | |
8 | ACS37800 |
Allegro |
Power Monitoring | |
9 | ACS302-5T3 |
STMicroelectronics |
THREE LINES AC SWITCH ARRAY | |
10 | ACS30MS |
Intersil Corporation |
Radiation Hardened 8-Input NAND Gate | |
11 | ACS32201 |
TSI |
PORTBLE CONSUMER | |
12 | ACS32MS |
Intersil Corporation |
Radiation Hardened Quad 2-Input OR Gate |