The Radiation Hardened ACS139MS contains two independent binary to one-of-four decoders, each with a single active low enable input. Data on the select inputs cause one of the four normally high outputs to go low. If the enable input is high, all four outputs remain high. During demultiplexer operation the enable input acts as the data input. The enable inpu.
• QML Qualified Per MIL-PRF-38535 Requirements
• 1.25Micron Radiation Hardened SOS CMOS
• Radiation Environment - Latch-up Free Under any Conditions - Total Dose . . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) - SEU Immunity . . . . . . . . . . . <1 x 10-10 Errors/Bit/Day - SEU LET Threshold . . . . . . . . . . . >100MeV/(mg/cm2)
• Input Logic Levels . . .VIL = (0.3)(VCC), VIH = (0.7)(VCC)
• Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±8mA
• Quiescent Supply Current. . . . . . . . . . . . . . . . . . .400µA
• Propagation Delay - Enable to Output . . . . . .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ACS132MS |
Intersil Corporation |
Radiation Hardened Quad 2-Input NAND Schmitt Trigger | |
2 | ACS138MS |
Intersil Corporation |
Radiation Hardened 3-to-8 Line Decoder/Demultiplexer | |
3 | ACS101A |
Semtech Corporation |
Acapella Optical Modem | |
4 | ACS102-5T1 |
STMicroelectronics |
AC LINE SWITCH | |
5 | ACS102-5TA |
STMicroelectronics |
AC LINE SWITCH | |
6 | ACS102-6T |
STMicroelectronics |
Transient protected AC switch | |
7 | ACS102A |
Semtech Corporation |
ACS102A Fiber Modem | |
8 | ACS103 |
Semtech Corporation |
Acapella Optical Modem | |
9 | ACS104A |
Semtech Corporation |
Fiber Modem | |
10 | ACS108 |
STMicroelectronics |
Overvoltage protected AC switch | |
11 | ACS108-5SA |
STMicroelectronics |
AC LINE SWITCH | |
12 | ACS108-5SN |
STMicroelectronics |
AC LINE SWITCH |