A1282 Specification Sensitive Unipolar Hall Effect Switch A1282 is a general sensitivity of unipolar Hall switch. DMOS Hall Effect Switch Supply Voltage 3.0 ~ 24V Bop:85 Gauss Brp:65 Gauss Output Open Drain Package SIP-3(I3) SOT-23(S3) Absolute Maximum Ratings At (Ta=25℃) Characteristics Values Supply voltage (VDD) 28 Output Voltage,(Vout) 28 .
e HBM Operate Point,(BOP) I3(S3) Release Point,(BRP) I3(S3) Hysteresis,(BHYS) |BOP - BRP| Min Typ Max Units 3.0 24.0 V 2.5 5.0 mA 500.0 mV 10.0 uA 0.04 0.45 uS 0.18 0.45 uS 4 KV 60(-100) 100(-60) Gauss 40(-80) 80(-40) Gauss 20 Gauss 100214 Page 1 of 2 RD-30012 Rev 1.02 Package Dimension and Sensor Location I3 Package (Top VieW) A1282 Specification Sensitive Unipolar Hall Effect Switch NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Do not bend leads within 1 mm of lead to package interface. 4. PINOUT: Pin No. Pin Name Funct.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A1280A |
Actel |
(A1225A - A1280A) FPGAs | |
2 | A1280XL |
Actel |
Integrator Series FPGAs | |
3 | A1280XL |
Actel |
Integrator FPGAs | |
4 | A1280XL |
Actel |
HiRel FPGAs | |
5 | A1280XL-xxxx |
Actel |
Integrator Series FPGAs | |
6 | A1281 |
MAT |
Low Sensitivity Unipolar Hall Effect Switch | |
7 | A1281Y |
Fairchild Semiconductor |
KSA1281 | |
8 | A1283 |
IDC |
2SA1283 | |
9 | A1289 |
Sanyo |
2SA1289 | |
10 | A12 |
Tyco Electronics |
10 TO 1000 MHz CASCADABLE AMPLIFIER | |
11 | A1201 |
Allegro MicroSystems |
Continuous-Time Bipolar Switch | |
12 | A1202 |
Allegro |
Continuous-Time Bipolar Switch |