The ADM8316/ADM8318/ADM8319/ADM8320/ADM8321/ ADM8322 are supervisory circuits that monitor power supply voltage levels and code execution integrity in microprocessorbased systems. As well as providing power-on reset signals, an on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. A reset signal can also be.
26 reset threshold options 2.5 V to 5 V in 100 mV increments 4 reset timeout options 1 ms, 20 ms, 140 ms, and 1120 ms (minimum) 4 watchdog timeout options 6.3 ms, 102 ms, 1.6 sec, and 25.6 sec (typical) Manual reset input Multiple reset output options Low power consumption Specified over wide temperature range (−40°C to +125°C) Qualified for automotive applications 5-lead SOT-23 package ADM8316/ADM8318/ADM8319/ADM8320/ADM8321/ADM8322 FUNCTIONAL BLOCK DIAGRAMS ADM8316 VCC VCC VREF RESET GENERATOR RESET MR DEBOUNCE WATCHDOG DETECTOR 11779-001 GND WDI Figure 1. ADM8316 APPLICATIONS Autom.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A1252 |
Sanyo Semicon Device |
2SA1252 | |
2 | A1252 |
ETC |
1.25mm pitch wire to board connector | |
3 | A1252H |
ETC |
1.25mm pitch wire to board connector | |
4 | A1252H-2 |
ETC |
1.25mm pitch wire to board connector | |
5 | A1252HA-2 |
ETC |
1.25mm pitch wire to board connector | |
6 | A1252WR |
ETC |
1.25mm pitch wire to board connector | |
7 | A1252WR-S |
ETC |
1.25mm pitch wire to board connector | |
8 | A1252WR-SF |
ETC |
1.25mm pitch wire to board connector | |
9 | A1252WV |
ETC |
1.25mm pitch wire to board connector | |
10 | A1252WV-S |
ETC |
1.25mm pitch wire to board connector | |
11 | A1252WV-SF |
ETC |
1.25mm pitch wire to board connector | |
12 | A1252WV-SF-2 |
ETC |
1.25mm pitch wire to board connector |