The 74LVC162245A; 74LVCH162245A is a 16-bit transceiver with 30 Ω termination resistors and 3-state outputs. The device can be used as two 8-bit transceivers or one 16-bit transceiver. The device features two output enables (1OE and 2OE) each controlling eight outputs, and two send/ receive (1DIR and 2DIR) inputs for direction control. A HIGH on nOE causes t.
• Overvoltage tolerant inputs to 5.5 V
• Wide supply voltage range from 1.2 V to 3.6 V
• CMOS low power consumption
• Multibyte flow-through standard pin-out architecture
• Low inductance multiple power and ground pins for minimum noise and ground bounce
• Direct interface with TTL levels
• Integrated 30 Ω termination resistors
• IOFF circuitry provides partial Power-down mode operation
• All data inputs have bus hold (74LVCH162245A only)
• Complies with JEDEC standard:
• JESD8-7A (1.65 V to 1.95 V)
• JESD8-5A (2.3 V to 2.7 V)
• JESD8-C/JESD36 (2.7 V to 3.6 V)
• ESD protection:
• HBM JESD22-A1.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 74LVC162245ADGV |
nexperia |
16-bit transceiver | |
2 | 74LVC162245ADL |
nexperia |
16-bit transceiver | |
3 | 74LVC162245A |
Philips |
16-bit transceiver | |
4 | 74LVC162245A |
nexperia |
16-bit transceiver | |
5 | 74LVC162245A-Q100 |
nexperia |
16-bit transceiver | |
6 | 74LVC162244A |
nexperia |
16-bit buffer/line driver | |
7 | 74LVC162373A |
nexperia |
16-bit D-type transparent latch | |
8 | 74LVC162373A |
Philips |
16-bit D-type transparent latch | |
9 | 74LVC162374A |
Philips |
16-bit edge triggered D-type flip-flop | |
10 | 74LVC16240A |
Philips |
16-bit buffer/line driver | |
11 | 74LVC16240A |
nexperia |
16-bit buffer/line driver | |
12 | 74LVC16240A-Q100 |
nexperia |
16-bit buffer/line driver |