The 74HCT9046A is a high-speed Si-gate CMOS device. It is specified in compliance with “JEDEC standard no. 7A”. • Tone decoding • Data synchronization and conditioning • Voltage-to-frequency conversion • Motor-speed control. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf ≤ 6 ns. SYMBOL fc PARAMETER VCO centre frequency CONDITIONS C1 = 40 pF; R1 = 3 .
• Low power consumption
• Centre frequency up to 17 MHz (typ.) at VCC = 5.5 V
• Choice of two phase comparators(1):
– EXCLUSIVE-OR (PC1)
– Edge-triggered JK flip-flop (PC2)
• No dead zone of PC2
• Charge pump output on PC2, whose current is set by an external resistor Rb
• Centre frequency tolerance ±10%
• Excellent voltage-controlled-oscillator (VCO) linearity
• Low frequency drift with supply voltage and temperature variations
• On chip bandgap reference
• Glitch free operation of VCO, even at very low frequencies
• Inhibit control for ON/OFF keying and for low standby power consumption
• Op.
The 74HCT9046A. This device features reduced input threshold levels to allow interfacing to TTL logic levels. Inputs als.
The 74HCT9046A. This device features reduced input threshold levels to allow interfacing to TTL logic levels. Inputs als.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 74HCT9014 |
Philips |
Nine wide Schmitt trigger buffer/line driver | |
2 | 74HCT9015 |
Philips |
Nine wide Schmitt trigger buffer/line driver | |
3 | 74HCT9114 |
nexperia |
Nine wide Schmitt trigger buffer | |
4 | 74HCT9114D |
nexperia |
Nine wide Schmitt trigger buffer | |
5 | 74HCT9115 |
Philips |
Nine wide Schmitt trigger buffer | |
6 | 74HCT93 |
Philips |
4-bit binary ripple counter | |
7 | 74HCT9323A |
Philips |
Programmable ripple counter | |
8 | 74HCT00 |
Texas Instruments |
Quadruple 2-Input Positive-Nand Gates | |
9 | 74HCT00 |
Diodes |
QUADRUPLE 2-INPUT NAND GATES | |
10 | 74HCT00 |
NXP |
Quad 2-input NAND gate | |
11 | 74HCT00 |
nexperia |
Quad 2-input NAND gate | |
12 | 74HCT00-Q100 |
nexperia |
Quad 2-input NAND gate |