The 74HC/HCT299 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns 74HC/HCT299 The 74HC/HCT299 contain eight edge-triggered D-type flip-flops and the interstage logic necessary to perform sync.
• Multiplexed inputs/outputs provide improved bit density
• Four operating modes:
– shift left
– shift right
– hold (store)
– load data
• Operates with output enable or at high-impedance OFF-state (Z)
• 3-state outputs drive bus lines directly
• Can be cascaded for n-bits word length
• Output capability: bus driver (parallel I/Os), standard (serial outputs)
• ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT299 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. QUICK REFERENCE DATA GND = .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 74HCT297 |
Philips |
Digital phase-locked-loop filter | |
2 | 74HCT20 |
Philips |
Dual 4-input NAND gate | |
3 | 74HCT20 |
nexperia |
Dual 4-input NAND gate | |
4 | 74HCT20-Q100 |
nexperia |
Dual 4-input NAND gate | |
5 | 74HCT20D |
nexperia |
Dual 4-input NAND gate | |
6 | 74HCT20DB |
nexperia |
Dual 4-input NAND gate | |
7 | 74HCT21 |
Philips |
Dual 4-input AND gate | |
8 | 74HCT221 |
Philips |
Dual non-retriggerable monostable multivibrator | |
9 | 74HCT221 |
nexperia |
Dual non-retriggerable monostable multivibrator | |
10 | 74HCT237 |
Philips |
3-to-8 line decoder/demultiplexer | |
11 | 74HCT237 |
Texas Instruments |
High-Speed CMOS Logic 3 to 8-Line Decoder/Demultiplexer | |
12 | 74HCT238 |
nexperia |
3-to-8 line decoder/demultiplexer |