The 74F564 has a broadside pinout configuration to facilitate PC board layout and allows easy interface with microprocessors. It is an 8-bit, edge triggered register coupled to eight 3-State output buffers. The two sections of the device are controlled independently by the clock (CP) and Output Enable (OE) control gates. The register is fully edge-triggered..
• 74F564 is broadside pinout version of 74F534
• Inputs and Outputs on opposite side of package allow easy
interface to Microprocessors
PIN CONFIGURATION
OE 1 D0 D1 D2 D3 D4 D5 D6 D7 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 VCC Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 CP
• Useful as an Input or Ouput port for Microprocessors
• 3-State Ouputs for Bus interfacing
• Common Output Enable
• 74F574 is a non-inverting version of 74F564
DESCRIPTION
The 74F564 has a broadside pinout configuration to facilitate PC board layout and allows easy interface with microprocessors. It is an 8-bit, edge triggered registe.
The 74F564 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Ena.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 74F563 |
National Semiconductor |
Octal D-Type Latch | |
2 | 74F563 |
Fairchild |
Octal D-Type Latch | |
3 | 74F569 |
Philips |
4-bit bidirectional binary synchronous counter | |
4 | 74F569 |
Fairchild |
4-Bit Bidirectional Counter | |
5 | 74F50109 |
Philips |
Synchronizing dual J-K positive edge-triggered flip-flop | |
6 | 74F50728 |
Philips |
Synchronizing cascaded dual positive edge-triggered D-type flip-flop | |
7 | 74F50729 |
Philips |
Synchronizing dual D-type flip-flop | |
8 | 74F5074 |
Philips |
Synchronizing dual D-type flip-flop/clock driver | |
9 | 74F51 |
Philips |
Dual 2-wide 2-input / 2-wise 3-input AND-OR-invert gate | |
10 | 74F51 |
Fairchild |
Dual 2-Wide 2-Input 2-Wide 3-Input AND-OR-Invert Gate | |
11 | 74F521 |
Philips |
8-bit identity comparator | |
12 | 74F521 |
Fairchild |
8-Bit Identity Comparator |