74AVC16245 The 74AVC16245 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74AVC16245 features two output enable inputs (nOE) for easy cascading and two send/receive inputs (nDIR) for direction control. Input nOE controls the outputs so that the buses are effectively isolated. This devi.
• Wide supply voltage range from 1.2 to 3.6 V
• Complies with JEDEC standard no. 8-1A/5/7
• CMOS low power consumption
• Input/output tolerant up to 3.6 V
• Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
• Low inductance multiple power and ground pins for minimum noise and ground bounce
• Power off disables outputs, permitting live insertion. DESCRIPTION
74AVC16245
The 74AVC16245 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74AVC1624.
The 74AVC16245 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 74AVC16244 |
NXP |
16-bit buffer/line driver | |
2 | 74AVC16244 |
nexperia |
16-bit buffer/line driver | |
3 | 74AVC16245-Q100 |
nexperia |
16-bit transceiver | |
4 | 74AVC16334A |
NXP Semiconductors |
16-bit registered driver | |
5 | 74AVC16334A |
nexperia |
16-bit registered driver | |
6 | 74AVC16373 |
NXP |
16-bit D-type transparent latch | |
7 | 74AVC16373 |
nexperia |
16-bit D-type transparent latch | |
8 | 74AVC16374 |
NXP |
16-bit edge triggered D-type flip-flop | |
9 | 74AVC16374 |
nexperia |
16-bit edge triggered D-type flip-flop | |
10 | 74AVC16374-Q100 |
nexperia |
16-bit edge triggered D-type flip-flop | |
11 | 74AVC16834 |
NXP |
18-bit registered driver | |
12 | 74AVC16834A |
nexperia |
18-bit registered driver |