The 5.0SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 5000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Recognized to UL 497B as an Isolated Loop Circuit Protector • .
• 5000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
• Recognized to UL 497B as an Isolated Loop Circuit Protector
• DO214AB SMT package for minimized board space
• Low profile package
• Typical failure mode is short from over-specified voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• ESD protection of data lines in accordance with IEC 61000-4-2, ESD 30kV (Air), 30kV (Contact)
• EFT protection of data lines in accordance with IEC 61000-4-4
• Built-in strain relief
• Glass passivated chip junction
• .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 5.0SMDJ8.5CA |
BOURNS |
Transient Voltage Suppressor Diode | |
2 | 5.0SMDJ8.5A |
BOURNS |
Transient Voltage Suppressor Diode | |
3 | 5.0SMDJ8.5AS |
Littelfuse |
TVS Diodes | |
4 | 5.0SMDJ8.0A |
BOURNS |
Transient Voltage Suppressor Diode | |
5 | 5.0SMDJ8.0AS |
Littelfuse |
TVS Diodes | |
6 | 5.0SMDJ8.0CA |
BOURNS |
Transient Voltage Suppressor Diode | |
7 | 5.0SMDJ8.0CAS |
Littelfuse |
TVS Diodes | |
8 | 5.0SMDJ80 |
SOCAY |
Surface Mount Transient Voltage Suppressors | |
9 | 5.0SMDJ80 |
RFE |
SURFACE MOUNT TVS DIODE | |
10 | 5.0SMDJ80 |
Protek Devices |
5000 WATT TVS COMPONENT | |
11 | 5.0SMDJ80A |
SOCAY |
Surface Mount Transient Voltage Suppressors | |
12 | 5.0SMDJ80A |
RFE |
SURFACE MOUNT TVS DIODE |