1 IGNOUTL Output 2 IGNOUTH Output 3 IGNSUP Input 4 IGNFB Input Ignition Output Low Ignition Output High Ignition Output Supply Feedback from Source Low side output to drive Gate/Base of IGBT/Bipolar Darlington High side output to drive Gate/Base of IGBT/Bipolar Darlington Tie to +5 V for Darlington, tie to the VPWR supply for IGBT output device Voltage fe.
• Designed to operate over the range of ~4.7 V ≤ VPWR ≤ 36 V
• Fuel Injector driver - Current Limit - 4.0 A Typical
• Ignition pre-driver can drive IGBT or Darlington bipolar junction
EK Pb-FREE SUFFIX 98ASA10556D
32 Pin SOICW EP
transistors
• Ignition pre-driver has independent high and low side outputs
ORDERING INFORMATION
• Relay driver - Current Limit - 4.0 A Typical
• Lamp driver- Current Limit - 1.5 A Typical
• All external outputs protected against short to battery, over-current
• Ignition and other drivers protected against over-temperature
• Interfaces directly to MCU Using 5.0 .
NXP Semiconductors Data sheet: Technical Data Multifunctional Ignition and Injector Driver Document Number: MC33812 Re.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 33810 |
Freescale Semiconductor |
Automotive Engine Controller | |
2 | 33811 |
Freescale Semiconductor |
Solenoid Monitor | |
3 | 33813 |
Freescale Semiconductor |
One Cylinder Small Engine Controller | |
4 | 33814 |
NXP |
Two cylinder small engine controller | |
5 | 33814 |
Freescale Semiconductor |
Two cylinder small engine controller | |
6 | 33816 |
NXP |
SD6 programmable solenoid controller | |
7 | 33800 |
Freescale Semiconductor |
Engine Control Integrated Circuit | |
8 | 3382G |
Bourns |
Rotary Position Sensor | |
9 | 3382H |
Bourns |
Rotary Position Sensor | |
10 | 3386 |
Bourns |
Trimming Potentiometer | |
11 | 3386B |
Bourns |
Trimming Potentiometer | |
12 | 3386C |
Bourns |
Trimming Potentiometer |