The M27C160 is a 16 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable). It is ideally suited for microprocessor systems requiring large data or program storage and is organised as either 2 Mbit words of 8 bit or 1 Mbit words of 16 bit. The pin-out is compatible with a 16 Mbit Mask ROM. The FDIP42W (window ceramic fri.
a 2 line control function which accommodates the use of multiple memory connection. The two line control function allows: a. the lowest possible memory power dissipation, b. complete assurance that output bus contention will not occur. For the most efficient use of these two control lines, E should be decoded and used as the primary device selecting function, while G should be made a common connection to all devices in the array and connected to the READ line from the system control bus. This ensures that all deselected memory devices are in their low power standby mode and that the output pi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 27C16 |
National Semiconductor |
UV Erasable CMOS PROM Military Qualified | |
2 | 27C16A |
Microchip Technology |
16K (2K x 8) CMOS EEPROM | |
3 | 27C1000 |
Macronix |
MX27C1000 | |
4 | 27C1001 |
STMicroelectronics |
1 Mbit 128Kb x8 UV EPROM and OTP EPROM | |
5 | 27C1024 |
ATMEL |
1-Megabit 64K x 16 OTP EPROM | |
6 | 27C1024 |
STMicroelectronics |
1 Mbit 64Kb x16 UV EPROM and OTP EPROM | |
7 | 27C1024 |
Advanced Micro Devices |
1 Megabit (65 K x 16-Bit) CMOS EPROM | |
8 | 27C1024 |
Macronix International |
1M-BIT [128K x 8/64K x 16] CMOS EPROM | |
9 | 27C1028 |
Fujitsu |
MBM27C1028 | |
10 | 27C128 |
General Semiconductor |
128K (16K x 8) CMOS UV Erasable PROM | |
11 | 27C128 |
Cypress Semiconductor |
CY27C128 | |
12 | 27C128 |
Microchip |
128K (16K x 8) CMOS EPROM |