145106P - Motorola

145106P MC145106P

P0 – P8 Programmable Inputs (PDIP — Pins 17 – 9; SOG — Pins 19, 17 – 14, 12 – 9) Programmable divider inputs (binary). fin Frequency Input (PDIP, SOG — Pin 2) Frequency input to programmable divider (derived from VCO). OSCin, OSCout Oscillator Input and Oscillator Output (PDIP, SOG — Pins 3, 4) Oscillator/amplifier input and output terminals. MOTOROLA MC1.

Features

cuitry. The phase detector may control a VCO and yields a high level signal when input frequency is low, and a low level signal when input frequency is high. An out
  –of
  –lock signal is provided from the on
  –chip lock detector with a “0” level for the out
  –of
  –lock condition.
•
•
•
•
•
•
•
•
•
•
• Single Power Supply Wide Supply Range: 4.5 to 12 V Provision for 10.24 MHz Crystal Oscillator 5.12 MHz Output Programmable Division Binary Input Selects up to 29 On
  –Chip Pull
  –Down Resistors on Programmable Divider Inputs Selectable Reference Divider, 210 or 211 (Including ÷ 2) Three
  –State Phase Detector Se.