SMD0705 |
Part Number | SMD0705 |
Manufacturer | Wing Shing Computer Components |
Description | SMD0705 1. SCOPE CRYSTAL UNIT This specification shall cover the characteristics of crystal unit with SMD0705-10.00—27.00MHz 2. ELECTRICAL SPECIFICATION ITEM HOLDER TYPE NOMINAL FREQUENCY LOAD CAPAC... |
Features |
rmal position Rate of bending 3 seconds in each cycle Number of bending 3 Results: There should be no distortion in appearance.
2) Lead solderability test Conditions: Dipping in solder(+230℃±5℃)for 5 seconds Results: More than 95% of surface being tested should be coated uniformly with solder. 3) Vibration test Conditions:
Results:
Frequency 10 – 55Hz Amplitude 0.762mm Sweep 1.0 minute Duration 2 hours Frequency and wave form of tested products must Remain within specifications. 4) Drop test Conditions: Results: Method of drop Natural drop Dropping floor Hard wood board Height 30cm Numbe... |
Document |
SMD0705 Data Sheet
PDF 52.92KB |
Distributor | Stock | Price | Buy |
---|
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SMD075F |
Tyco |
SMD Series PolySwitch | |
2 | SMD03 |
SeCoS |
(SMD03 - SMD36) 300W TVS DIODE | |
3 | SMD030F |
Tyco |
SMD Series PolySwitch | |
4 | SMD030F-2018 |
Tyco |
SMD Series PolySwitch | |
5 | SMD03C |
SeCoS |
TVS DIODE |