SN74AUCH244 |
Part Number | SN74AUCH244 |
Manufacturer | Texas Instruments (https://www.ti.com/) |
Description | ordering information This octal buffer/driver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation. The SN74AUCH244 is organized as two 4-bit line driv... |
Features |
separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
This device is fully specified for partial-pow... |
Document |
SN74AUCH244 Data Sheet
PDF 1.38MB |
Distributor | Stock | Price | Buy |
---|
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | SN74AUCH245 |
Texas Instruments |
OCTAL BUS TRANSCEIVER | |
2 | SN74AUCH16244 |
Texas Instruments |
16-BIT BUFFER/DRIVER | |
3 | SN74AUCH16374 |
Texas Instruments |
16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
4 | SN74AUCH32244 |
Texas Instruments |
32-BIT BUFFER/DRIVER | |
5 | SN74AUCH32374 |
Texas Instruments |
32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP |