| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Maxim Integrated Products |
Audio Subsystem S 2.7V to 5.5V Single Supply Voltage S 725mW Speaker Output (VPVDD = 3.7V, ZSPK = 8I + 68µH) S 40mW/Channel Headphone Output (RHP = 16I) S Low-Emission Class D Amplifier S Efficient Class H Headphone Amplifier S Ground-Referenced Headphone Outp |
|
|
|
|
Maxim Integrated Products |
Audio Subsystem S 2.7V to 5.5V Speaker Supply Voltage S 1.6V to 2V Headphone Supply Voltage S 700mW Speaker Output (VPVDD = 3.7V, ZSPK = 8ω + 68µH) S 37mW/Channel Headphone Output (RHP = 16I) S Low-Emission Class D Amplifier S Efficient Class H Headphone Ampli |
|
|
|
|
Maxim Integrated Products |
1.8W Filterless Stereo Class D Audio Power Amplifier a fully differential architecture, full-bridged (BTL) output, and comprehensive click-and-pop suppression. The MAX9702 speaker amplifier features high 75dB PSRR, low 0.07% THD+N, and SNR in excess of 97dB. Shortcircuit and thermal-overload protection |
|
|
|
|
Maxim Integrated Products |
10W Stereo/15W Mono Filterless Spread-Spectrum Class D Amplifiers ♦ Filterless Class D Amplifier ♦ Unique Spread-Spectrum Mode Offers 5dB Emissions Improvement Over Conventional Methods ♦ Up to 78% Efficient (RL = 8Ω) ♦ Up to 88% Efficient (RL = 16Ω) ♦ 15W Continuous Output Power into 8Ω (MAX9703) ♦ 2x10W Continuou |
|
|
|
|
Maxim |
15W / Filterless / Spread-Spectrum Mono/Stereo Class D Amplifiers ♦ Filterless Class D Amplifier ♦ Unique Spread-Spectrum Mode Offers 5dB Emissions Improvement Over Conventional Methods ♦ Up to 78% Efficient (RL = 8Ω) ♦ Up to 88% Efficient (RL = 16Ω) ♦ 15W Continuous Output Power into 8Ω (MAX9703) ♦ 2x10W Continuou |
|
|
|
|
Maxim Integrated Products |
1.3W Filterless Stereo Class D Audio Power Amplifier a fully differential architecture, full-bridged (BTL) output, and comprehensive click-and-pop suppression. The MAX9702 speaker amplifier features high 75dB PSRR, low 0.07% THD+N, and SNR in excess of 97dB. Shortcircuit and thermal-overload protection |
|
|
|
|
Maxim Integrated Products |
Low-Noise Audio Subsystem Applications Cell Phones Portable Media Players Ordering Information appears at end of data sheet. Simplified Block Diagram 1.8V BATTERY I2C CONTROL POWER SUPPLY STEREO/ MONO INPUT DRC AND EXPANDER VOLUME CLASS D AMPLIFIER LIMITER CLASS H AMPLI |
|
|
|
|
Maxim Integrated |
Single/Dual/Quad Micropower Rail-to-Rail I/O Comparators ● ● Ultra-Low Single-Supply Operation down to +1.6V ● ● Rail-to-Rail Common-Mode Input Voltage Range ● ● 3µA Quiescent Supply Current per Comparator ● ● Open-Drain Outputs Swing Beyond VCC ● ● 1.235V ±1.5% Precision Internal Reference (MAX965/967/968/969) |
|
|
|
|
Maxim |
1.2W / Low-EMI / Filterless / Class D Audio Amplifier high 72dB PSRR, a low 0.01% THD+N, and SNR in excess of 90dB. Short-circuit and thermal-overload protection prevent the device from damage during a fault condition. The MAX9700 is available in 10-pin TDFN (3mm ✕ 3mm ✕ 0.8mm), 10-pin µMAX, and 12-bump |
|
|
|
|
Maxim Integrated Products |
2.3W Ultra-Low-EMI Filterless Class D Audio Amplifier o Filterless Amplifier Passes FCC-Radiated Emissions Standards with 24in of Cable o Unique Spread-Spectrum Mode and Active Emissions Limiting (AEL) Achieves Better than 20dB Margin Under FCC Limits o Zero Dead Time (ZDT) H-Bridge Maintains Stateof-th |
|
|
|
|
Maxim Integrated Products |
Audio Subsystem with Mono Class D Speaker and Class H Headphone Amplifiers S 2.7V to 5.5V Speaker Supply Voltage S 1.6V to 2V Headphone Supply Voltage S 700mW Speaker Output (VPVDD = 3.7V, ZSPK = 8ω + 68µH) S 37mW/Channel Headphone Output (RHP = 16I) S Low-Emission Class D Amplifier S Efficient Class H Headphone Ampli |
|
|
|
|
Maxim Integrated Products |
3-Channel 2.3W Filterless Class D Amplifiers Maxim’s patented DirectDrive™ headphone amplifier, providing ground-referenced headphone outputs without the need for bulky DC-coupling capacitors. The headphone outputs are capable of delivering 95mW per channel into 16Ω from a 3.3V supply, and are |
|
|
|
|
Maxim Integrated Products |
25W/50W Filterless Spread-Spectrum Stereo/Mono Class D Amplifier include fully differential inputs, comprehensive click-and-pop suppression, and four selectable-gain settings (22dB, 25dB, 29.5dB, and 36dB). A pin-programmable thermal flag provides seven different thermal warning thresholds. Short-circuit and therm |
|
|
|
|
Maxim Integrated Products |
3-Channel 2.3W Filterless Class D Amplifiers Maxim’s patented DirectDrive™ headphone amplifier, providing ground-referenced headphone outputs without the need for bulky DC-coupling capacitors. The headphone outputs are capable of delivering 95mW per channel into 16Ω from a 3.3V supply, and are |
|
|
|
|
Maxim Integrated Products |
20W/40W Filterless Spread-Spectrum Mono/Stereo Class D Amplifier include fully differential inputs, comprehensive click-and-pop suppression, and four selectable-gain settings (22dB, 25dB, 29.5dB, and 36dB). A pin-programmable thermal flag provides seven different thermal warning thresholds. Short-circuit and therm |
|