DataSheet.in

SE2435L डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - High-Power RF Front-End Module - Skyworks

भाग संख्या SE2435L
समारोह High-Power RF Front-End Module
मैन्युफैक्चरर्स Skyworks 
लोगो Skyworks लोगो 
पूर्व दर्शन
1 Page
		
<?=SE2435L?> डेटा पत्रक पीडीएफ

SE2435L pdf
DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE
Table 1. SE2435L Signal Descriptions
Pin Name
Description
1 CSD
Shutdown control input
2 PA_IN
PA input (from Tx filter)
3 CPS
Rx path select control input
4 CTX
Transmit enable control input
5 TX_FLT
Transmit signal (to Tx filter)
6 TR
Bi-directional RF signal to/from transceiver
7 ANT_SEL
Antenna select control input
8 GND
Ground
9 LNA_IN
LNA input (from Rx filter)
10 N/C
Not connected internally to the device
11 RX_FLT
Rx signal from antennas (to Rx filter)
12 ANT2
Antenna port 2
13 N/C
Not connected internally to the device
Note 1: Z optimum = 5 Ω for +30 dBm or 8 Ω for +27 dBm POUT.
Pin Name
14 ANT1
15 N/C
16 TX_IN
17 N/C
18 N/C
19 N/C
20 PA_OUT
21 VCC2
22 N/C
23 VCC0
24 VCC1
Paddle GND
Description
Antenna port 1
Not connected internally to the device
Tx signal to antennas (from OMN)
Not connected internally to the device
Not connected internally to the device
Not connected internally to the device
PA output (to Z optimum) (Note 1)
Positive power supply
Not connected internally to the device
Positive power supply
Positive power supply
Exposed die paddle; electrical and thermal
ground. Connect to PCB ground
Electrical and Mechanical Specifications
Table 2 provides the absolute maximum ratings, and Table 3
shows the recommended operating conditions.Electrical
specifications are provided in Tables 4 through 9. Typical
performance characteristics are shown in Figures 3 through 8.
Table 2. SE2435L Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage (no RF)
VCC
–0.3 5.5
V
Operating temperature
TA
–40 85
°C
Storage temperature
TSTG
–40 125
°C
Tx input power at TR port
PIN_TX_MAX
+10 dBm
Rx input power at ANT1 or ANT2 ports
PIN_RX_MAX
+10 dBm
Electrostatic discharge:
ESD
Human Body Model (HBM), Class 1C
1000 V
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 July 7, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412H

विन्यास 14 पेज
डाउनलोड[ SE2435L Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
SE2435LHigh-Power RF Front-End ModuleSkyworks
Skyworks


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English