DataSheet.in

NCV51510 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - Termination Source / Sink Regulator - ON Semiconductor

भाग संख्या NCV51510
समारोह Termination Source / Sink Regulator
मैन्युफैक्चरर्स ON Semiconductor 
लोगो ON Semiconductor लोगो 
पूर्व दर्शन
1 Page
		
<?=NCV51510?> डेटा पत्रक पीडीएफ

NCV51510 pdf
NCP51510, NCV51510
PIN FUNCTION DESCRIPTION
Pin Number Pin Name
Pin Function
1 VRO OUTPUT − Buffered Output of VRI Reference Input pin.
2 VCC INPUT − Regulator Analog Power Input pin. Connect to the system supply voltage. Bypass VCC to AGND
with a 1 mF or greater ceramic capacitor.
3
AGND
Analog Ground
4 VRI INPUT − External Reference Input for VTT Output (see Figure 1 for typical application)
5
PGOOD
OUTPUT − VTT “Power Good” pin (open drain output)
6
VTTS
INPUT − Remote Sense Input for VTT. The VTTS pin provides accurate remote feedback sensing of the
VTT output.
7 SS INPUT − Suspend Shutdown Control Input. CMOS compatible. Logic HIGH = enable,
logic LOW = shutdown. Connect to VDDQ for normal operation.
8
PGND
Power Ground. Internally connected to Low−side MOSFET
9 VTT OUTPUT − Regulated Power Output pin
10
PVCC
INPUT − Regulator Power Input pin. Internally connected to High−side MOSFET
− THERMAL Pad for thermal connection. The exposed pad must be connected to the ground plane using multiple vias
PAD
for maximum power dissipation performance.
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
PVCC to PGND
(Note 1)
−0.3 to 4.3
VCC to AGND
(Note 1)
VCC
−0.3 to 4.3
VRI, VRO, SS, PGOOD to AGND
VTT to PGND
(Note 1) − −0.3 to (VCC + 0.3)
V
(Note 1) − −0.3 to (PVCC + 0.3)
VTTS to AGND
(Note 1)
VTTS
−0.3 to (PVCC + 0.3)
PGND to AGND
PGND
−0.3 to +0.3
Storage Temperature
Operating Junction Temperature Range
Tstg −65 to 150
°C
TJ −40 to 125
ESD Capability, Human Body Model
(Note 2)
ESDHBM
2000
V
ESD Capability, Machine Model
(Note 2)
ESDMM
200
V
VTT Output Continuous RMS Current
100 sec
1 sec
±1.6
A
±2.5
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
Latchup Current Maximum Rating tested per JEDEC standard: JESD78.
DISSIPATION RATINGS
Package
10−Pin DFN
TA =705C Power Rate
1951 mW
Derating Factor Above TA = 705C
24.4 mW / °C
www.onsemi.com
2

विन्यास 7 पेज
डाउनलोड[ NCV51510 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
NCV51510Termination Source / Sink RegulatorON Semiconductor
ON Semiconductor


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English