DataSheet.in

MAX1072 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - (MAX1072 / MAX1075) 10-Bit ADCs - Maxim Integrated Products

भाग संख्या MAX1072
समारोह (MAX1072 / MAX1075) 10-Bit ADCs
मैन्युफैक्चरर्स Maxim Integrated Products 
लोगो Maxim Integrated Products लोगो 
पूर्व दर्शन
1 Page
		
<?=MAX1072?> डेटा पत्रक पीडीएफ

MAX1072 pdf
1.8Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VL to GND ...................-0.3V to the lower of (VDD + 0.3V) or +6V
Digital Inputs
to GND ....................-0.3V to the lower of (VDD + 0.3V) or +6V
Digital Output
to GND .......................-0.3V to the lower of (VL + 0.3V) or +6V
Analog Inputs and
REF to GND.............-0.3V to the lower of (VDD + 0.3V) or +6V
RGND to GND .......................................................-0.3V to +0.3V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
12-Pin TQFN (derate 16.9mW/°C above +70°C) ......1349mW
Operating Temperature Range
MAX107_ ETC.................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±5%, VL = VDD, VREF = 4.096V, fSCLK = 28.8MHz, 50% duty cycle, TA = -40°C to +85°C, unless otherwise noted. Typical
values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
DC ACCURACY
Resolution
10 Bits
Relative Accuracy
INL (Note 1)
±0.5 LSB
Differential Nonlinearity
DNL (Note 2)
±0.5 LSB
Offset Error
±2 LSB
Offset-Error Temperature
Coefficient
±1 ppm/°C
Gain Error
Offset nulled
±2 LSB
Gain Temperature Coefficient
±2 ppm/°C
DYNAMIC SPECIFICATIONS (fIN = 525kHz sine wave, VIN = VREF, unless otherwise noted.)
Signal-to-Noise Plus Distortion
SINAD
60
Total Harmonic Distortion
THD
61
-80 -74
dB
dB
Spurious-Free Dynamic Range
SFDR
-80 -74
dB
Intermodulation Distortion
Full-Power Bandwidth
IMD fIN1 = 250kHz, fIN2 = 300kHz
-3dB point, small-signal method
-78 dB
20 MHz
Full-Linear Bandwidth
S/(N + D) > 56dB, single ended
2 MHz
CONVERSION RATE
Minimum Conversion Time
Maximum Throughput Rate
tCONV (Note 3)
0.556 μs
1.8 Msps
Minimum Throughput Rate
(Note 4)
10 ksps
Track-and-Hold Acquisition Time
Aperture Delay
tACQ
(Note 5)
104 ns
5 ns
Aperture Jitter
(Note 6)
30 ps
External Clock Frequency
fSCLK
28.8 MHz
2 _______________________________________________________________________________________

विन्यास 18 पेज
डाउनलोड[ MAX1072 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
MAX107Dual / 6-Bit / 400Msps ADC with On-Chip / Wideband Input AmplifierMaxim
Maxim
MAX1070(MAX1070 / MAX1071) 10-Bit ADCsMaxim Integrated Products
Maxim Integrated Products


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English