B-4353 डेटा पत्रक PDF( Datasheet डाउनलोड )

डेटा पत्रक - Recessed Sanutary Napkin Disposal - Bobrick

भाग संख्या B-4353
समारोह Recessed Sanutary Napkin Disposal
मैन्युफैक्चरर्स Bobrick 
लोगो Bobrick लोगो 
पूर्व दर्शन
1 Page
<?=B-4353?> डेटा पत्रक पीडीएफ

B-4353 pdf
For side wall of single toilet compartment. Self-closing door pulls down for access to disposal with less than 5 pounds of force
(22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Receptacle is removable for
servicing. Cable door-swing limiters prevent damage to washroom accessories and walls. Disposable paper liners for sanitary
napkin receptacle are available from Bobrick as an optional accessory; order Part No. 353-12.
Provide framed rough wall opening 11-1/4" wide x 9-1/2" high (285 x 240mm). Minimum recessed depth required from finish
face of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite
wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims
between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4'' (4.2 x 32mm) sheet-metal screws
(not furnished by manufacturer).
Recessed sanitary napkin disposal shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have
satin finish. Front of sanitary napkin disposal door shall have same degree of arc and match other Bobrick Contura™ Series
accessories in the washroom. Radius on corners and edges of flange and door shall complement other Bobrick Contura™
Series washroom accessories. Flange shall be drawn, one-piece, seamless construction. Self-closing door shall be drawn, one-
piece, seamless construction; secured to cabinet with a spring-loaded, full-length stainless steel piano-hinge; and equipped with
two stainless steel cable door-swing limiters, two hooks for retaining receptacle, a finger-pull recess at top for easy opening,
and an international graphic symbol identifying sanitary napkin disposal. Door shall pull down with less than 5 pounds of
force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Unit shall be furnished with
a removable, leak-proof, molded polyethylene receptacle. Receptacle shall have a capacity of 1.2-gal. (4.6-L). Manufacturer's
service and parts manual shall be provided to the building owner/manager upon request.
Recessed Sanitar y Napkin Disposal shall be Model B-4353 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
B-4353  Revised 11/06
Printed in U.S.A.
© 2006 by Bobrick Washroom Equipment, Inc.

विन्यास 2 पेज
डाउनलोड[ B-4353 Datasheet.PDF ]

शेयर लिंक

अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
B-4353Recessed Sanutary Napkin DisposalBobrick

भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
FAE391-A20AM/FM Automotive Electronic TunerMitsumi

Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z    |   2017   |  संपर्क   |   खोज     |   English