DataSheet.in

53262 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - SOLID STATE RELAY/ 400VDC- 0.5A OPTICALLY ISOLATED/ SHORT CIRCUIT PROTECTED - Micropac Industries

भाग संख्या 53262
समारोह SOLID STATE RELAY/ 400VDC- 0.5A OPTICALLY ISOLATED/ SHORT CIRCUIT PROTECTED
मैन्युफैक्चरर्स Micropac Industries 
लोगो Micropac Industries लोगो 
पूर्व दर्शन
1 Page
		
<?=53262?> डेटा पत्रक पीडीएफ

53262 pdf
53262
Short Circuit Protected Solid State Relay
__________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
TC = -40°C to +85°C, unless otherwise specified.
Parameter
Symbol Min. Typ.* Max. Unit
s
Test Conditions
Notes
INPUT CHARACTERISTICS
Input Forward Voltage
Input Reverse Breakdown Voltage
OUTPUT CHARACTERISTICS
Output On-Resistance
VF
VR
R (ON)
Output Leakage Current
Turn-On Time
Turn-Off time
Rise Time
Fall Time
Over-current Limit
Over-current Trip Time
Peak Short Circuit Current
Short Circuit Shut Down Time
COMMON CHARACTERISTICS
Input-Output Leakage Current
IO (OFF)
tON
tOFF
tR
tF
ICL
tCL
ISC(PK)
tSC
II-O
Thermal Resistance (junction-case)
* Typical values are at TC = 25°C
θJC
2.0 2.7 3.8 VDC IF = 8 mA
6 20 VDC IR = 10 µA
7
IF = 8 mA, IO = 0.5 A
0.8 1.2 Pulse width = 10 ms
Duty cycle 10%
250
µA
VF = 0.6 VDC
VO = 400 VDC
6
6
  8 ms

IF = 8 mA
2 ms IO = 0.5 A
3&

6
ms Pulse width = 10 ms Figure 2
Duty cycle 10%
  1 ms
1.1 4.5 A VO = 54 VDC

1 ms RL = 12
15 20 A Short-while-on
  100 µs @ TC = 25°C
4
5&7
RH 45%, t = 5 s
  1 µA VI-O = 1000 VDC
TC = 25°C
18.5 °C/W
1&2
7
Notes:
1. Input pins shorted together and output pins shorted together.
2. Input -output potential applied momentarily, not a steady state operating condition.
3. Rise time is measured from 10% to 90% of load current (90% to 10% of VO). Fall time is measured from 90% to
10% of load current (10% to 90% of VO). Guaranteed but not tested.
4. The minimum over-current limit occurs at Tc of 85°C. The maximum over-current limit occurs at Tc of -40°C.
5. Use 0.25 ohm sense resistor for monitoring the peak short circuit current.
6. The user should apply the appropriate transient suppression technique to the output terminals of the relay when
the loads are inductive enough to generate voltage spikes.
7. Guaranteed but not tested.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION 905 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
05/16/2002
Pg. 2 of 4

विन्यास 4 पेज
डाउनलोड[ 53262 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
53262SOLID STATE RELAY/ 400VDC- 0.5A OPTICALLY ISOLATED/ SHORT CIRCUIT PROTECTEDMicropac Industries
Micropac Industries
5326650VDC - 6A HIGH TEMPERATURE SOLID STATE RELAYMicropac Industries
Micropac Industries


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English