DataSheet.in

LC90 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - 1500 Watt Low Capacitance Transient Voltage Suppressor - Microsemi

भाग संख्या LC90
समारोह 1500 Watt Low Capacitance Transient Voltage Suppressor
मैन्युफैक्चरर्स Microsemi 
लोगो Microsemi लोगो 
पूर्व दर्शन
1 Page
		
<?=LC90?> डेटा पत्रक पीडीएफ

LC90 pdf
LC6.5 – LC170A
MAXIMUM RATINGS
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
Thermal Resistance, Junction to Lead @ 0.375 inch
(10 mm) from body
Thermal Resistance, Junction to Ambient (1)
Peak Pulse Power @ TL = +25 ºC (2)
Power Dissipation @ TL +125 ºC (3)
Solder Temperature @ 10 s
TJ and TSTG
R ӨJL
R ӨJA
P PP
PD
T SP
-65 to +175
50
110
1500
1
260
ºC
ºC/W
ºC/W
W
W
oC
Notes: 1. When mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm.
2. At 10/1000 µs with repetition rate of 0.01% or less (see Figure 1).
3. At 3/8 inch (10 mm) from body. TVS devices are not typically used for dc power dissipation and are instead operated at or less than their
rated standoff voltage (VWM) except for transients that briefly drive the device into avalanche breakdown (VBR to VC region). Also see
Figures 2, 3 and 4 for further protection details in rated peak pulse power for unidirectional and bidirectional configurations respectively.
MECHANICAL and PACKAGING
CASE: Welded, hermetically sealed metal and glass.
TERMINALS: Tin-lead plated or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750 method 2026.
MARKING: Part number and polarity diode symbol.
POLARITY: Cathode connected to case and polarity indicated by diode symbol.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 1.4 grams.
See Package Dimensions on last page.
PART NOMENCLATURE
MQ LC 6.5 A (e3)
Reliability Level
MQ (reference JAN)
MX (reference JANTX)
MV (reference JANTXV)
MSP (reference JANS)
Blank = Commercial
Low Capacitance
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
Tolerance Level
A = +/- 5 %
blank = +/- 10 %
Reverse Standoff Voltage (VWM)
(See Electrical Characteristics
table)
Symbol
I (BR)
V (BR)
VWM
VC
I PP
P PP
ID
SYMBOLS & DEFINITIONS
Definition
Breakdown Current: The current used for measuring breakdown voltage V(BR).
Breakdown Voltage: This is the breakdown voltage the device will exhibit at 25 oC.
Rated Working Standoff Voltage: The maximum peak voltage that can be applied over the operating temperature range.
Maximum Clamping Voltage: The maximum peak voltage appearing across the TVS when subjected to the peak pulse
current in a one millisecond time interval. The peak pulse voltage is the combination of voltage rise due to both the
series resistance and thermal rise and positive temperature coefficient (αV(BR)).
Peak Impulse Current: The peak current during the impulse.
Peak Pulse Power: The pulse power as determined by the product of VC and IPP.
Standby Current: The current at the standoff voltage VWM.
T4-LDS-0293, Rev. 1 (5/6/13)
©2013 Microsemi Corporation
Page 2 of 6

विन्यास 6 पेज
डाउनलोड[ LC90 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
LC9.01500 Watt Low Capacitance Transient Voltage SuppressorMicrosemi
Microsemi
LC9.0A1500 Watt Low Capacitance Transient Voltage SuppressorMicrosemi
Microsemi


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English