DataSheet.in

SHT30-DIS डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - Humidity and Temperature Sensor - Sensirion

भाग संख्या SHT30-DIS
समारोह Humidity and Temperature Sensor
मैन्युफैक्चरर्स Sensirion 
लोगो Sensirion लोगो 
पूर्व दर्शन
1 Page
		
<?=SHT30-DIS?> डेटा पत्रक पीडीएफ

SHT30-DIS pdf
Datasheet SHT3x-DIS
1 Sensor Performance
Humidity Sensor Specification
Parameter
SHT30 Accuracy tolerance1
SHT31 Accuracy tolerance1
SHT35 Accuracy tolerance1
Repeatability2
Resolution
Hysteresis
Specified range3
Response time5
Long-term drift
Table 1 Humidity sensor specification.
Temperature Sensor Specification
Parameter
SHT30 Accuracy tolerance1
SHT31 Accuracy tolerance1
SHT35 Accuracy tolerance1
Repeatability2
Resolution
Specified Range
Response time 8
Long Term Drift
Table 2 Temperature sensor specification.
Condition
Typ.
Max.
Typ.
Max.
Typ.
Max.
Low
Medium
High
Typ.
at 25°C
extended4
63%
Typ.7
Value
2
Figure 2
2
Figure 3
±1.5
Figure 4
0.25
0.15
0.10
0.01
0.8
0 to 100
86
<0.25
Units
%RH
-
%RH
-
%RH
-
%RH
%RH
%RH
%RH
%RH
%RH
s
%RH/yr
Condition
typ., 0°C to 65°C
typ., 0°C to 90°C
typ., 20°C to 60°C
Low
Medium
High
Typ.
-
63%
max
Value
0.2
0.2
±0.1
0.24
0.12
0.06
0.015
-40 to 125
>2
<0.03
Units
°C
°C
°C
°C
°C
°C
°C
°C
s
°C/yr
1 For definition of typical and maximum accuracy tolerance, please refer to the document “Sensirion Humidity Sensor Specification Statement”.
2 The stated repeatability is 3 times the standard deviation (3σ) of multiple consecutive measurements at the stated repeatability and at constant ambient conditions. It
is a measure for the noise on the physical sensor output. Different measurement modes allow for high/medium/low repeatability.
3 Specified range refers to the range for which the humidity or temperature sensor specification is guaranteed.
4 For details about recommended humidity and temperature operating range, please refer to section 1.1.
5 Time for achieving 63% of a humidity step function, valid at 25°C and 1m/s airflow. Humidity response time in the application depends on the design-in of the sensor.
6 With activated ART function (see section 4.7) the response time can be improved by a factor of 2.
7 Typical value for operation in normal RH/T operating range, see section 1.1. Maximum value is < 0.5 %RH/yr. Higher drift values might occur due to contaminant
environments with vaporized solvents, out-gassing tapes, adhesives, packaging materials, etc. For more details please refer to Handling Instructions.
8 Temperature response times strongly depend on the type of heat exchange, the available sensor surface and the design environment of the sensor in the final
application.
www.sensirion.com
March 2017 - Version 4
2/20

विन्यास 20 पेज
डाउनलोड[ SHT30-DIS Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
SHT30-DISHumidity and Temperature SensorSensirion
Sensirion


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English