DataSheet.in

MAX1082 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - Serial 10-Bit ADCs - Maxim Integrated

भाग संख्या MAX1082
समारोह Serial 10-Bit ADCs
मैन्युफैक्चरर्स Maxim Integrated 
लोगो Maxim Integrated लोगो 
पूर्व दर्शन
1 Page
		
<?=MAX1082?> डेटा पत्रक पीडीएफ

MAX1082 pdf
MAX1082/MAX1083
300ksps/400ksps, Single-Supply, 4-Channel,
Serial 10-Bit ADCs with Internal Reference
ABSOLUTE MAXIMUM RATINGS
VDD_ to GND............................................................ -0.3V to +6V
VDD_ to VDD2 ....................................................... -0.3V to +0.3V
CH0–CH3, COM to GND ........................... -0.3V to (VDD + 0.3V)
REF, REFADJ to GND................................ -0.3V to (VDD + 0.3V)
Digital Inputs to GND .............................................. -0.3V to +6V
Digital Outputs to GND.............................. -0.3V to (VDD + 0.3V)
Digital Output Sink Current .................................................25mA
Continuous Power Dissipation (TA = +70°C)
16-Pin TSSOP (derate 6.7mW/°C above +70°C) ........ 533mW
Operating Temperature Ranges
MAX1082_C_E/MAX1083_CUE ......................... 0°C to +70°C
MAX1082_E_E/MAX1083_EUE ....................... -40°C to +85°C
Storage Temperature Range ............................ -60°C to +150°C
Lead Temperature (soldering, 10s) ................................ +300°C
Soldering Temperature (reflow)..........................................260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—MAX1082
(VDD1 = VDD2 = +4.5V to +5.5V, COM = GND, fOSC = 6.4MHz, 50% duty cycle, 16 clocks/conversion cycle (400ksps), external +2.5V
at REF, REFADJ = VDD1, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
DC ACCURACY (Note 1)
Resolution
Relative Accuracy (Note 2)
Differential Nonlinearity
Offset Error
Gain Error (Note 3)
SYMBOL
CONDITIONS
INL
DNL
MAX1082A
MAX1083B
No missing codes over temperature
MIN TYP MAX UNITS
10 bits
±0.5
±1.0
LSB
±1.0 LSB
±3.0 LSB
±3.0 LSB
Gain-Error Temperature
Coefficient
±1.6
ppm/°C
Channel-to-Channel Offset-Error
Matching
±0.2
LSB
DYNAMIC SPECIFICATIONS (100kHz sine-wave input, 2.5Vp-p, 400ksps, 6.4MHz clock, bipolar input mode)
Signal-to-Noise plus Distortion
Ratio
SINAD
60 dB
Total Harmonic Distortion
Spurious-Free Dynamic Range
Intermodulation Distortion
Channel-to-Channel Crosstalk
(Note 4)
THD
SFDR
IMD
Up to the 5th harmonic
fIN1 = 99kHz, fIN2 =102kHz
200kHz, VIN = 2.5Vp-p
-70 dB
70 dB
76 dB
-78 dB
Full-Power Bandwidth
Full-Linear Bandwidth
CONVERSION RATE
Conversion Time (Note 5)
Track/Hold Acquisition Time
Aperture Delay
Aperture Jitter
Serial Clock Frequency
Duty Cycle
-3dB point
SINAD > 58dB
tCONV
tACQ
fSCLK
6 MHz
350 kHz
2.5 µs
400 ns
10 ns
<50 ps
0.5 6.4 MHz
40 60 %
2 Maxim Integrated

विन्यास 23 पेज
डाउनलोड[ MAX1082 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
MAX1085V / 1.5Gsps / 8-Bit ADC with On-Chip 2.2GHz Track/Hold AmplifierMaxim
Maxim
MAX1080300ksps/400ksps / Single-Supply / Low-Power / 8-Channel / Serial 10-Bit ADCs with Internal ReferenceMaxim
Maxim


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English